Click image to view full size image
Material: copper
Key point on quality: for size finishing, it is normal key point, but the hardness is another key point.
Short description: copper part for socket in hardness HV130
Specification: the thickness for switch in 1.0mm, 0.8mm, for socket, the thickness in 0.8mm or 0.6mm
Finished shape:
Application:
It is key part for socket, and moving part for switch.
Quality control:
1) Working size and working area of this part ;
2) From mass production, it should be controlled by jigs, also it can be controlled by scanner if the size is controlled in 0.02mm;
If the product design is complete, we will follow all details as per drawing 100%. Production time: 35days after confirmation;
FAQ:
How to check the material quality ?
The quick method is to fold raw material by several time and check the final status.
From outside looking, some difference between good one & poor one ?
The rough method is to see the cutting area.
May I have samples firstly before mass production ?
Yes, we have this key step. We will ensure the samples from same grade material and final progressive die. Also we will control the finishing, like plating. For mass production, we order the raw material from one time only, not two times. It will help us a little for size control. As per normal doing method, the size is about 0.02 minus and plus, material in 0.8mm.
If some problem on plastic part, it need correction on size correct from Copper stamping part, is it possible ?
It is possible. but it is not 3 times modification. As we focus one time finishing.
http://www.switchsocketparts.com/